Rattler 369D Installation Guide download pdf (Page 43)

5. Press and release the Program switch.

The LED will now report the last system shutdown by flashing

for one minute in the following grouped patterns:

The factory settings are indicated in bold text in the table below.

ttrraannssmmiitttteerr ffuunnccttiioonnss

The receiver uses a computer-based learn routine to learn the

transmitter buttons. This makes it possible to assign any specific

transmitter button, or combination of buttons, to any receiver

function. The transmitter initially comes programmed with the

Standard Configuration, but may also be customized by an

LED Shutdown Mode

Flashes

One System timed out

Two Over-rev shutdown

Three Low or no RPM

Four Transmitter shutdown (or optional push-button)

Six (+/-) Shutdown

Seven (-) Neutral safety shutdown (H2/1 BLACK/WHITE)

Eight Wait-to-start timed out

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 62 63

No comments

Rattler 369D Installation Guide Page 43