Rattler 369D Installation Guide download pdf (Page 41)

88 AACCTTIIVVAATTIIOONN PPUULLSSEE CCOOUUNNTT::

This feature allows the

number of pulses to activate the remote start feature to be

changed from 1, 2, or 3 pulses. The pulse count programmed to

start the vehicle will also be the same required to shut down the

remote start.

99 22nndd IIGGNNIITTIIOONN//AACCCCEESSSSOORRYY OOUUTTPPUUTT::

This will allow

the PINK/WHITE to be used as a 2nd ignition or a

2nd accessory.

1100 AACCCCEESSSSOORRYY SSTTAATTEE DDUURRIINNGG WWAAIITT--TTOO--SSTTAARRTT::

This

will allow the programming of the accessory wire during the

wait-to-start period of a diesel motor. When ON the accessory

comes on when the wait-to-start output is activated and stays

on, dropping out during crank and returning once the car has

started. When OFF the accessory will activate as a normal acces-

sory.

1111 22nndd SSTTAATTUUSS OOUUTTPPUUTT::

If programmed to status mode,

this output will turn on when the remote start is activated. In

defogger mode the output can be programmed to a latched or a

pulsed output. When programmed to the latched output the

status will only stay active for 10 minutes.

1122 UUNNLLOOCCKK OOUUTTPPUUTT::

This will program the unlock output

to one or two pulses.

1133 IIGGNNIITTIIOONN CCOONNTTRROOLLLLEEDD LLOOCCKK::

When programmed

ON the doors will lock when the key is on and all doors are

closed.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 62 63

No comments

Rattler 369D Installation Guide Page 41