Rattler 369D Installation Guide download pdf (Page 24)

If your door lock system is a different type than described in this

guide, go to www.diyrattler.com to download the door lock

guide. The door lock guide identifies the type of system for your

vehicle. With the dual-relay door lock module you can properly

interface the power locks with your remote start system. If you

are unable to identify your door lock system with the web infor-

mation please contact Rattler Technical Support.

Although there are numerous types of door lock circuits, the

most common is the negative triggered door lock system. Check

the web information on your vehicle to determine your door

lock system type. If your vehicle has a negative triggered door

lock system, follow the steps below. If your vehicle has any other

type of door lock system, please contact Rattler Technical

Support to obtain the correct door lock wiring diagram.

Locate the suspected lock wire, and with the red meter lead still

secured to a (+)12 volt source, probe the suspect wire with the

black lead of the meter. Press the door lock switch to the lock

position and watch the meter display. The correct wire will show

a 10.00 to 12.00 volt pulse when the switch is pressed.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

No comments

Rattler 369D Installation Guide Page 24