Rattler 369D Installation Guide download pdf (Page 33)

ttrraannssmmiitttteerr//rreecceeiivveerr lleeaarrnn rroouuttiinnee

The system comes with one transmitter that has been taught to

the receiver. The receiver can store up to 4 different transmitter

codes in memory. Use the following learn routine and the infor-

mation in the Features Menu to add transmitters to the system

or to change button assignments if desired.

The Valet/Program switch, plugged into the blue port, is used

for programming. There is a basic sequence of steps to remember

whenever programming this unit: Key, Choose, Transmit and

Release.

KKeeyy

. Turn the ignition to the ON

position.

CChhoooossee

. Within 10 seconds, press and

release the Valet/Program switch the

number of times corresponding to the

desired channel listed below. Once you

have selected the channel, press the switch once more and hold

it. The LED will flash to confirm the selected channel. Do not

release the Valet/Program switch.

auto learn transmitter configuration

button one Lock/Unlock

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 62 63

No comments

Rattler 369D Installation Guide Page 33