Rattler 369D Installation Guide download pdf (Page 19)

and neutral safety wires.

First locate the factory brake wire using your multi-meter. Find

the switch at the top of the metal arm coming off the brake

pedal. There are usually two wires connected to that switch.

Locate the wire color according to the web information. With

your black meter lead still in the kick panel, probe the suspected

wire with the red lead of your meter. With the brake pedal at rest

it should read 0.00 volts. While watching the meter, depress the

brake pedal. The meter should read between 10.00 volts and

13.00 volts. Once you have located the correct brake wire, solder

the small BROWN wire on the secondary harness to it and tape

the connection with electrical tape.

important! Do not use the vehicle until you confirm the

operation of the brake shutdown.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 62 63

No comments

Rattler 369D Installation Guide Page 19