Rattler 369D Installation Guide

MMooddeell 336699DD➤OOwwnneerr’’ss//IInnssttaallllaattiioonn GGuuiiddee

© 2003 directed electronics, inc.the vehicle starts in gear, cease remote start operation imme-diately and consult with the Dealer to fix the problem

8© 2003 directed electronics, inc.pprriimmaarryy hhaarrnneessss ((HH//11)),, 99--ppiinn ccoonnnneeccttoorrsseeccoonnddaarryy hhaarrnneessss ((HH

9© 2003 directed electronics, inc.rreellaayy ssaatteelllliittee rriibbbboonn hhaarrnneessss ((HH//33)),, 44--ppiinn ccoonnnneeccttoorrrreellaayy

10© 2003 directed electronics, inc.iinnssttaallllaattiioonnBe sure to read this section thoroughly and view the Rattler Do-It-Yourself Installation Vi

11© 2003 directed electronics, inc.step 1Ground WireThe BLACK wire on the main 8-pin harness is ground. Thiswire should be connected to a clean, paint

12© 2003 directed electronics, inc.step 2Constant Power and Ignition wires Almost all power and ignition wires can be found behind the keycylinder und

13© 2003 directed electronics, inc.Once the constant power wire has been identified, solder the twothick RED wires from the control module to it and c

14© 2003 directed electronics, inc.If the vehicle requires more than one ignition as per the Web siteinformation follow the same test procedure and so

15© 2003 directed electronics, inc.Now that the accessories have been located, find the wiresuspected to be the starter wire according to the web info

16© 2003 directed electronics, inc.and neutral safety wires.First locate the factory brake wire using your multi-meter. Findthe switch at the top of t

i© 2003 directed electronics, inc.lliimmiitteedd lliiffeettiimmee ccoonnssuummeerr wwaarrrraannttyyFor a period of one calendar year from the date

17© 2003 directed electronics, inc.Installing the hood pin switch requires drilling a ¼-inch hole inthe metal lip under the hood. Choose a location th

18© 2003 directed electronics, inc.The after-market safety switch will have two wires coming off it.Take one of the wires (it does not matter which on

19© 2003 directed electronics, inc.BLACK/WHITE wire on the secondary connector and cover theconnection with electrical tape.The shut down toggle switc

20© 2003 directed electronics, inc.Using the web information on the vehicle, locate the suspectedwire and place the red lead of the meter to a constan

21© 2003 directed electronics, inc.If your door lock system is a different type than described in thisguide, go to www.diyrattler.com to download the

22© 2003 directed electronics, inc.Once the correct wire has been found, solder the small LIGHTGREEN wire off the main connector to it and cover the c

23© 2003 directed electronics, inc.The Rattler Do-It-Yourself system comes with a dual-relay packincluded for door lock operation. To interface this p

24© 2003 directed electronics, inc.If the idle is too slow or too high, the system will shut down theengine to prevent damage. If the starter does not

25© 2003 directed electronics, inc.Have a second person press the gas pedal to increase the RPMsand watch the meter display. When the RPMs increase th

26© 2003 directed electronics, inc.step 8Factory Alarm Arm or DisarmSince most newer vehicles come equipped with a factory alarmsystem, it is necessar

ii© 2003 directed electronics, inc.TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WAR-RANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACH ENTITYPARTI

27© 2003 directed electronics, inc.When the correct wire has been found, solder the smallGREEN/BLACK wire to the wire which activates in the unlockpos

28© 2003 directed electronics, inc.To determine what bypass module your vehicle requires, checkyour web vehicle information sheet.step 10Mounting the

29© 2003 directed electronics, inc.step 11Testing the systemOnce steps 1-9 have been completed, the operation of thesystem can be tested.Place the two

30© 2003 directed electronics, inc.ttrraannssmmiitttteerr//rreecceeiivveerr lleeaarrnn rroouuttiinneeThe system comes with one transmitter that has

31© 2003 directed electronics, inc.button two Channel 2button three Remote Start+ buttons one and two Timer mode+ button one and three Short-Run/Turbo

32© 2003 directed electronics, inc.You can advance from programming one channel to another byreleasing the Program switch and tapping it to advance st

33© 2003 directed electronics, inc.change the settings. It is possible to access and change any of thefeature settings using the Valet/Program switch.

34© 2003 directed electronics, inc.go out indicating the change.4.RReelleeaassee. The Program switch can nowbe released. You can advance from feature

35© 2003 directed electronics, inc.ffeeaattuurreess mmeennuuThe factory settings are indicated in bold text in the table below.note: The number in pa

36© 2003 directed electronics, inc.ffeeaattuurree ddeessccrriippttiioonnss11 EENNGGIINNEE CCHHEECCKK OONN//OOFFFF: In the default setting there

1© 2003 directed electronics, inc.ttaabbllee ooff ccoonntteennttsslliimmiitteedd lliiffeettiimmee ccoonnssuummeerr wwaarrrraannttyy.. .. .. ..

37© 2003 directed electronics, inc.44 PPAARRKKIINNGG LLIIGGHHTTSS FFLLAASSHHIINNGG//CCOONNSSTTAANNTT::In thedefault setting, the unit will flash

38© 2003 directed electronics, inc.88 AACCTTIIVVAATTIIOONN PPUULLSSEE CCOOUUNNTT:: This feature allows thenumber of pulses to activate the remot

39© 2003 directed electronics, inc.1144.. IIGGNNIITTIIOONN CCOONNTTRROOLLLLEEDD UUNNLLOOCCKK:: Whenprogrammed ON the doors will unlock automati

40© 2003 directed electronics, inc.5. Press and release the Program switch.The LED will now report the last system shutdown by flashingfor one minute

41© 2003 directed electronics, inc.authorized dealer. Unless otherwise specified, the buttons usedin all of the instructions in this manual correspond

42© 2003 directed electronics, inc.uussiinngg yyoouurr ssyysstteemmwarning! safety firstThe following safety warnings must be observed at all times:

43© 2003 directed electronics, inc.keys in the ignition. The user must also have the neutral safetyfeature of the vehicle periodically checked, wherei

44© 2003 directed electronics, inc.ELECTRONICS, INC.WILL NOT BE HELD RESPON-SIBLE OR PAY FOR INSTALLATION OR REINSTALLA-TION COSTS.lockingPressing fo

45© 2003 directed electronics, inc.remote startThis feature allows you to remotely start and run your vehicle fora programmable period of time. This m

46© 2003 directed electronics, inc.While the vehicle is running during remote start operation, thesystem will monitor the vehicle and will automatical

2© 2003 directed electronics, inc.timer mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

47© 2003 directed electronics, inc.3. Press and release the and buttons at the sametime.4. The lights will flash to indicate the remote start has en

48© 2003 directed electronics, inc.5. The system will start every 3 hours until canceled by thebrake, hood, or neutral safety shut-down wires.To exit

49© 2003 directed electronics, inc.pprrooggrraammmmiinngg ooppttiioonnssProgramming options control your system's normal, operationalset-up. Mos

50© 2003 directed electronics, inc.vating the unit with the ignition key in the “run” position. Ifthe vehicle then runs normally, retest your ignition

51© 2003 directed electronics, inc.after the remote start becomes active. If there is voltagepresent, skip to Step 4. If there is not voltage present,

52© 2003 directed electronics, inc.Was the Tach Learn successful? The LED must light solidlyand brightly to indicate a successful learn.Make sure that

53© 2003 directed electronics, inc.gglloossssaarryy ooff tteerrmmssControl Unit:The “brain” of your system. Usually hidden underthe dash area of the

54© 2003 directed electronics, inc.wwiirriinngg qquuiicckk rreeffeerreennccee gguuiiddee

55© 2003 directed electronics, inc.nnootteess_________________________________________________________________________________________________________

56© 2003 directed electronics, inc.

3© 2003 directed electronics, inc.wwhhaatt iiss iinncclluuddeedd➤ Control Module➤ One 3-Button Transmitter➤ 9-Pin Main H/1 Harness➤ 5-Pin H/2 Second

Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.✂✂QUICK REFERENCE GUIDE:To lock the doors using your rem

58© 2003 directed electronics, inc.

59© 2003 directed electronics, inc.

The company behind this system is Directed Electronics, Inc.Since its inception, Directed Electronics has had one purpose, to provide consumers withth

4© 2003 directed electronics, inc.iimmppoorrttaanntt iinnffoorrmmaattiioonnCongratulations on the purchase of your remote start keylessentry system.

5© 2003 directed electronics, inc.your warrantyYour warranty registration must be completely filled out andreturned within 10 days of purchase. Your p

6© 2003 directed electronics, inc.1. Never operate the system in an enclosed or partiallyenclosed area without ventilation (such as a garage).2. When