Rattler 369D Installation Guide download pdf (Page 25)

Once the correct wire has been found, solder the small LIGHT

GREEN wire off the main connector to it and cover the connec-

tion with electrical tape.

Repeat this process for the unlock wire but press the switch to

the unlock position when testing. Once you have identified the

correct wire, solder the LIGHT BLUE wire off the main

connector to it and cover the connection with electrical tape.

note: Additional parts may be required to interface with

certain door lock types.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 62 63

No comments

Rattler 369D Installation Guide Page 25